Vxl-instruments Itona Md75 Series Manual do Utilizador descarregar pdf (Página 19)

Removing the Front Panel 15

7. Remove the side mask as shown in Figure 8-5.

Figure 8-5: Removing the Side Mask

Note: Ensure that the position of the inlay card does not change when the client is

reassembled.

8. Apply isopropyl alcohol on the glue holding the cables; pull the glue out using nose pliers.

9. Unplug the cables.

10. Using the star screwdriver, unscrew the screw holding the Front Panel.

Figure 8-6: Unscrewing the Front Panel Screw

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Sem comentários

Vxl-instruments Itona Md75 Series Manual do Utilizador Página 19